Mute; Activate/Deactivate Tap Switch; Song/Set Mode; Song Mode - Musicom Lab EFX MK-V Owner's Manual

2.3 Mute

Press & hold the I I A2/MUTE switch for 1 second to mute the guitar signal. When muted, the MUTE LED
turns on in red. Press the I I A2/MUTE or any switches from 1 1 through 6 6 switch to cancel the MUTE function.
The mute function is not available in the IA mode,.
VOL.LOOP
The mute position (
Refer to the Block Diagram

2.4 Activate/Deactivate TAP Switch

The 6 6 /TAP switch can have two functions based upon your needs. By default, this switch is set up to
access the Preset 6. You can change this switch to tap tempo function. The TAP switch function can be
activated/deactivated by pressing the I I A1/SETUP and I I A2/MUTE switches for 1 second simultaneously.
TAP can be synchronized with MIDI Time Clock(MTC) or Function Switch 3(F3). The F3 supports for devices
that only have an analog tap tempo input. Also you can select whether to send the MTC/F3 for 1 bar, 2
bars or continuously. When TAP switch function is selected, tapping the 6 6 /TAP switch will change the MTC
or F3 rate to the tempo of your taps. At this time, the Global BPM will be changed to the tempo of your
taps. When the EFX MK-V powers up, the Global BPM is 120.
Refer to the TAP Sync With
3. Song / Set Mode
The Song operating mode allows access to the EFX MK-V's 99 songs. A Song is a group of 6 presets that
are selected for use in a particular song. Each preset in a song can be chosen from any of the 360
presets. The Set operating mode allows up to 40 songs of the EFX Mk-V's 99 songs to be arranged in any
order to create a set. The EFX MK-V can support 40 different sets.
When You are in the Song and Set mode, the B B ANK
instead of moving from bank to bank.
Operating Mode
Refer to the

3.1 Song Mode

Line 1 and 2 - a to d indicate a song number.
Line 1 - e to g indicate a preset BPM in the song.
Line 1 - i to x indicate a preset title.
Line 2 - e indicates that you are in the Song mode.
Line 2 - f indicates a preset number(1 to 6) within the song.
Line 2 - h to x indicate the on/off status of loops, outputs and function switches.
Press/hold the B B ANK
The LEDs above 1 1 - 6 6 switches will blink in blue and the LCD display will show the song title.
The preset is selected via pressing any switches from 1 1 through 6 6 .
The LEDs above 1 1 - 6 6 switches will stop blinking, the LED above the switch will be turned on in blue.
The LCD display will show the preset title for 2 seconds and then show the song title.
EFX MK-V Audio Controller Owner's Manual
OUTPUT
or ) to be linked with this switch can be selected in UTILITY menu.
on the page 4 and the
on the page 27 and the
on the page 26 of the manual.
or B B ANK switch to scroll through the 99 available songs.
Mute Position on the page 26 of the manual.
TAP Sync Time on the page 28 of the manual.
and B B ANK Switches move from song to song
9