Mute; Activate/Deactivate Tap Switch; Song/Set Mode; Song Mode - Musicom Lab EFX-ME Owner's Manual

2.4 Mute

▲
In the PRESET mode, pressing & holding BANK switch and quickly press the 4 switch will mute the guitar signal.
▲
When muted, the MUTE LED turns on in purple. Pressing & holding BANK switch and quickly press the 4 switch or
any switches from 1 through 4 switch will cancel the MUTE function.
NOTE
The mute function is not available in the IA mode.

2.5 Activate/Deactivate TAP Switch

The 4/TAP switch can have two functions based upon your needs. By default, this switch is set up to access the Preset
4. You can change this switch to tap tempo function. The TAP switch function can be activated/deactivated by pressing
▼ ▲
the MODE/BANK and BANK switches simultaneously.
TAP can be synchronized with MIDI Time Clock(MTC) or Function Switch 1(F1). The F1 supports for devices that
only have an analog tap tempo input. Also you can select whether to send the MTC/F1 for 1 bar, 2 bars or
continuously. When TAP switch function is selected, tapping the 4/TAP switch will change the MTC or F1 rate to the
tempo of your taps. At this time, the Global BPM will be changed to the tempo of your taps. When the EFX-ME
powers up, the Global BPM is 120.
Refer to the TAP SYNC WITH and TAP SYNC TIME on the page 20 of the manual.
3. Song / Set Mode
The SONG operating mode allows access to the EFX-ME's 99 songs. A Song is a group of 4 presets that are selected
for use in a particular song. Each preset in a song can be chosen from any of the 360 presets.
The SET operating mode allows up to 40 songs of the EFX-ME's 99 songs to be arranged in any order to create a set.
The EFX-ME can support 40 different sets.
▼ ▲
When You are in the SONG and SET mode, the MODE/BANK or BANK
Switches move from song to song
instead of moving from bank to bank.
Refer to the OPERATING MODE on the page 18 of the manual.

3.1 Song Mode

• Line 1 and 2 - a to d indicate a song number.
• Line 1 - e to p indicate a song title.
• Line 2 - e indicates a preset number(1 to 4) within the song.
• Line 2 - g to p indicate the on/off status of loops, function switches and Global MIDI CCs.
9
EFX - ME Audio Controller Owner's Manual