Entering Characters - Panasonic Lumix DC-G100 Operating Instructions Manual

13. Menu Guide

Entering Characters

Follow the steps below when the character entry screen is displayed.
1
Enter characters.
●
Press
and then press
character to enter is displayed.
(Repeat this)
• To repeatedly enter the same character,
rotate or
entry position cursor.
• If you select an item and press
– [ ]: Change the character type to [A] (upper case characters), [a] (lower
case characters), [1] (numbers), and [&] (special characters)
– [ ]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
2
Complete entering.
●
Select [Set] and then press
• A maximum of 30 characters can be entered (maximum of 9 characters
when setting names in [Face Recog.]).
• A maximum of 15 characters can be entered for [
(maximum of 6 characters when setting names in [Face Recog.]).
372
to select characters
until the
to the right to move the
, you can perform the following operations:
.
], [ ], [ ], [ ] and [ ]