Panasonic Lumix DC-G100 Operating Instructions Manual page 200

7. Drive/Shutter/Image Stabilizer
™ ™
[More Settings] (Exposure Bracket)
[Step]
[Sequence]
[Single Shot
Setting]
• When you record images with Exposure Bracket after setting the exposure
compensation value, the images recorded are based on the selected
exposure compensation value.
™ ™
[More Settings] (Aperture Bracket)
[Image Count]
Example when the initial position is set to F8.0
4.0 5.6 8.0
1st image,
• The available aperture values vary depending on the lens.
200
Sets the image count and exposure compensation step.
[3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record
7 images in 1 EV steps)
Sets the order in which images are recorded.
[ ]: Takes only one image each time the shutter button is
pressed.
[ ]: Takes all of the set number of images when the shutter
button is pressed once.
• The [ ] icon blinks until all of the set number of pictures
is taken.
[3]/[5]: Records the set number of images while alternately
setting the aperture value in the sequence of one before and
then one after using the initial aperture value as the reference.
[ALL]: Records images using all aperture values.
11 16
2nd image, 3rd image ...
22
7th image