Panasonic Lumix DC-G100 Operating Instructions Manual page 238

9. Flash
™ ™
Setting Items ([Wireless
Setup])
• To fire a test flash, press [DISP.].
[External
Flash]
Adjust.]
[Manual
Adjust.]
[A Group]/
[B Group]/
[C Group]
Adjust.]
[Manual
Adjust.]
*
1 This cannot be set when using the Flash (DMW-FL200L: optional).
238
[TTL]: The camera automatically sets the flash output.
[AUTO] *
side.
[Firing
[MANUAL]: Sets the flash output of the external flash
Mode]
manually.
[OFF]: The external flash outputs only communication
light.
[Flash Adjusts the flash output of the external flash manually
when [Firing Mode] is set to [TTL].
Sets the flash output of the external flash when [Firing
Mode] is set to [MANUAL].
Flash
• It can be set within the range of [1/1] (full flash
output) to [1/128] in 1/3 steps.
[TTL]: The camera automatically sets the flash output.
[AUTO]: Sets the flash output on the wireless flash
side.
[Firing
[MANUAL]: Sets the flash output of the wireless flash
Mode]
manually.
[OFF]: The wireless flashes of the specified group will
not fire.
[Flash Adjusts the flash output of the wireless flash manually
when [Firing Mode] is set to [TTL].
Sets the flash output of the wireless flash when [Firing
Mode] is set to [MANUAL].
Flash
• It can be set within the range of [1/1] (full flash
output) to [1/128] in 1/3 steps.
1
: Sets the flash output on the external flash