Panasonic Lumix DC-G100 Operating Instructions Manual page 397

[Location Logging]
The smartphone sends its location information to the camera via
Bluetooth, and the camera performs recording while writing the acquired
location information.
Getting started:
• Enable the GPS function on the smartphone.
1
Enable [Location Logging] on
the camera.
●
[
Logging]
• The camera will enter a mode where
location information can be recorded
and [
screen of the camera.
2
Record images with the camera.
• Location information will be written to the recorded images.
• When [
information cannot be acquired, therefore data cannot be written.
Smartphone GPS positioning may not be possible if the smartphone is
within a building, a bag, or similar. Move the smartphone to a position
affording a wide view of the sky to improve positioning performance.
In addition, refer to the operating instructions of your smartphone.
• Images with location information are indicated with [
• Be sure to pay special attention to the privacy, the likeness rights, etc. of the
subject when you use this function. Use at your own risk.
• The smartphone drains its battery faster while acquiring location information.
] [Bluetooth]
[ON]
] is displayed in the recording
] on the recording screen appears translucent, location
[Location
14. Wi-Fi/Bluetooth
].
397