Panasonic Lumix DC-G100 Operating Instructions Manual page 361

[Folder / File
Settings]
[No.Reset]
[Reset]
[Reset Network
Settings]
[Pixel Refresh]
[Level Gauge
Adjust.]
[Demo Mode]
[Format]
[Select Folder]/[Create a New Folder]/[File Name Setting]
Set the folder and file name where to save the images.
• For details, refer to page 123.
Resets the file number of the next recording to 0001.
• For details, refer to page 125.
Returns the camera to its default settings.
• For details, refer to page 69.
Network settings are reset to the default, such as equipment
information you have registered using [Wi-Fi Setup] or
[Bluetooth].
(Excluding [LUMIX CLUB])
This optimizes the image sensor and image processing.
• The image sensor and image processing are optimized
when the camera is purchased. Use this function when
bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
[Adjust.]
Hold the camera in a horizontal position, and press
level gauge will be adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.
You can try focusing, peaking, etc. in [Post Focus], with the
image picture.
Formats the card (initialization).
• For details, refer to page 40.
13. Menu Guide
. The
361