Panasonic Lumix DC-G100 Operating Instructions Manual page 211

• In [ ] mode, you can compensate the exposure by setting the ISO
sensitivity to [AUTO].
• When the exposure compensation value falls below or exceeds ±3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
• The set exposure compensation value is stored even if you turn off the
camera.
• You can set the exposure compensation value to be reset when the camera
is turned off:
[ ] [ ]
• Exposure Bracket can be set and flash output can be adjusted on the
exposure compensation screen:
[ ] [ ]
8. Brightness (Exposure)/Coloring/Picture effect
[Exposure Comp. Reset] (333)
[Exposure Comp. Disp. Setting] (339)
211