Panasonic Lumix DC-G100 Operating Instructions Manual page 61

Viewfinder
With information
60 p
• You can switch the viewfinder/monitor display method:
[ ] [
Using the level gauge
The yellow line indicates the current angle. Correct the angle of the
camera so that it matches the white line.
Horizontal
Vertical
Green (no tilt)
• Even after correcting the tilt, there may still be an error of approx. ±1°.
• When the camera is tilted significantly upwards or downwards, the level
gauge may not be displayed correctly.
• You can adjust the level gauge and reset the adjusted values in [Level
Gauge Adjust.] in the [Setup] menu. (361)
Without
information
] [LVF/Monitor Disp. Set] (347)
With information
+
level gauge
60 p
3. Basic Operations
Without
information
+
level gauge
61