Entering Characters - Panasonic LUMIX DC-GH5M2 Operating Instructions Manual

14. Menu Guide – Entering Characters

Entering Characters

Follow the steps below when the character entry screen is displayed.
1
Enter characters.
≥Press 3421 to select characters and then press
until the character to enter is displayed. (Repeat this)
•
To repeatedly enter the same character, rotate
move the entry position cursor.
•
If you select an item and press
operations:
– [ ]: Change the character type to [A] (upper case characters), [a] (lower
case characters), [1] (numbers), and [&] (special characters)
– [ ] ]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
•
When entering a password, (A) shows the number of characters you have
entered and the number of characters you can enter.
2
Complete entering.
≥Select [Set] and then press
or , you can perform the following
(A)
or .
610
or
or to the right to