Panasonic Lumix DC-G100 Operating Instructions Manual page 474

16. Materials
The PC is not recognized when I use a Wi-Fi connection.
The camera cannot be connected to the PC using the Wi-Fi function.
• At the time of purchase, this camera is set to use a workgroup name of
"WORKGROUP".
If you have changed the workgroup name of the PC, this will not be recognized.
In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC
to which to connect. (429)
• Check that the login name and password are correctly typed.
• When the clock settings of the PC connected to the camera differs considerably
from those of the camera, the camera cannot be connected to the PC depending
on the OS.
It takes time to transmit an image to the web service.
Transmission of the image fails midway.
Some images cannot be transmitted.
• Is the size of the image too large?
– Reduce the image size at [Size] (427), and then send.
– Transmit after dividing the video with [Video Divide] (292).
• File format of the video that can be sent differs depending on the destination.
(404)
I have forgotten the password for the Wi-Fi.
• Reset network settings. (361)
However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset.
(With the exception of [LUMIX CLUB])
474