Entering Characters - Panasonic Lumix DC-BS1H Operating Instructions Manual

Entering Characters

Follow the steps below when the character entry screen is displayed.
1
Enter characters.
●
Press to select characters and then press [MENU/SET] until the character to enter is displayed. (Repeat this)
● To repeatedly enter the same character, rotate
● If you select an item and press [MENU/SET], you can perform the following operations:
– [ ]: Change the character type to [A] (upper case characters), [a] (lower case characters), [1] (numbers), and [&]
(special characters)
– [ ]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
● When entering a password,
can enter.
2
Complete entering.
●
Select [Set] and then press [MENU/SET].
11. Menu Guide - Entering Characters
to the right to move the entry position cursor.
shows the number of characters you have entered and the number of characters you
A
- 212 - - 212 -