Removing The System Memory (Ram) - Clevo S3100 Service Manual

Removing the System Memory (RAM)

The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDR3 1066 and 1333MHz. The main memory can be expanded up to 8GB. The SO-DIMM modules supported are
1024MB, and 2048MB and DDRIII Modules. The total memory size is automatically detected by the POST routine once
you turn on your computer.
Memory Upgrade Process
1. Turn off the computer, remove the battery
2. The RAM modules will be visible at points
3. Gently pull the two release latches (
arrows(Figure 5b ).
a.
(page 2 - 5) and keyboard
)
1 & 2 (Figure 5a .
- ) on the sides of the memory socket in the direction indicated by the
3 6
b.
2
1
(page 2 - 8).
3 5
4 6
Removing the System Memory (RAM) 2 - 9
Disassembly
Figure 5
RAM Module
Removal
a. The RAM modules
will be visible at
1 & 2 .
points
b. Pull the release
latches.

Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the clea-
nest hands have oils
which can attract parti-
cles, and degrade the
module's perfor-
mance.