Removing The Hard Disk Drive - Clevo S3100 Service Manual

Disassembly

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Figure 2
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
HDD Assembly
Removal
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
a. Locate the HDD bay co-
ver and remove the
1. Turn off the computer, and remove the battery
screws.
2. Locate the hard disk bay cover and remove screws

• 2 Screws
2 - 6 Removing the Hard Disk Drive
(page 2 - 5).
1 & 2
a.
1
HDD System Warning
New HDD's are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
If you have access to the internet, download the latest application and hardware driver updates for
the operating system you plan to install. Copy these to a removable medium.
(Figure 2a ) .
2
