Removing The Keyboard - Clevo S3100 Service Manual

Disassembly

Removing the Keyboard

Figure 4
Keyboard Removal
1. Turn off the computer and remove the battery
2. Remove screw
a. Remove screw from the
3. Press the four keyboard latches
bottom case of the compu-
(Figure
ter.
b. Press the four latches to 4. Carefully lift the keyboard
release the keyboard.
5. Disconnect the keyboard ribbon cable
c. Lift the keyboard up and
6. Carefully lift up the keyboard
disconnect the cable from
the locking collar. a.
d. Remove the keyboard.

Re-Inserting the Key-
board
When re-inserting the
keyboard, align first
the four keyboard tabs
( d)
Figure 4 that are
located at the bottom,
to the slots in the case.
b.
2 - 8 Removing the Keyboard
1 from the bottom case of the computer
2 - 5 at the top of the keyboard to elevate the keyboard from its normal position
4b) *You may need to use a small screwdriver to do this.
6
up, being careful not to bend the keyboard ribbon cable
7
6 (Figure
1
2 3 4 5
(page 2 - 5).
.
(Figure 4a)
from the locking collar socket 8
4d) off the computer.
c.
d.
7
(Figure 4c).
(Figure 4c)
7
6
8
7
6
Keyboard Tabs