The Front Panel/ 前面板; Switch, Buttons And I/O Interfaces/ 开关和按钮 / 開關和按鈕 - Advantech ACP-4340 User Manual

4u rackmount industrial chassis with four mobile sas/ sata hdd trays
Hide thumbs Also See for ACP-4340:
Table of Contents

Advertisement

3.1
The Front Panel/ 前面板
Figure 3.1 Closed front panel / 关门时的前视图 / 關門時的前視圖
Figure 3.2 Open front panel/ 开门时的前视图 / 開門時的前視圖
3.2
Switch, Buttons and I/O Interfaces/ 开关和按钮 /
開關和按鈕
Momentary Power switch: Press this switch to turn the system power on or off.
Please use system shutdown or press this switch for few seconds to turn off the sys-
tem ATX power.
System Reset button: Press this button to reboot the system.
Alarm Reset button: Whenever a fault occurs in the system (e.g., fan failure or the
chassis is overheated), the audible alarm will be activated. Pressing this button stops
the alarm from beeping. Check whether the whole system is running properly.
System Recovery button: When failing to reboot the system by pressing the
System Reset button, press this button to restore factory settings rapidly (this is a
buit-in function based on the motherboard).
Dual USB ports: For connecting a wide range of USB devices for data transfer,
backup or input.
电源开关:按下此按钮可开启或关闭系统电源。请使用系统关机或持续按下此按钮数
秒钟以关闭系统 ATX 电源。
系统重启按钮:按下此按钮可重启系统。
警报复位按钮:当系统发生故障时 (比如:风扇故障或者机箱过热) ,会响起警报声。
按下此按钮可停止警报声,并请检视整体系统有何异常状况。
单键操作系统回复按钮 : 当按下系统重启按钮仍无法有效将系统重启,此操作系统回
复按钮将能快速回复原出厂默认值 ( 必须配合母板内建此功能 )。
双 USB 接口:此接口可连接各种 USB 设备用于数据传输、备份或输入。
ACP-4340 User Manual/ 用户手册
18

Advertisement

Table of Contents
loading

Table of Contents