Headset Operation; Belt Clip - VTech 5808 User Manual

Vtech user's manual cordless telephone 5808

Hide thumbs Also See for 5808:

Table of Contents

Headset Operation

Your handset is equipped with a 2.5mm headset jack for use with an optional accessory

headset for handsfree operation. If you choose to use the headset option, you must obtain

a compatible accessory headset. To purchase a headset, contact the Supplier.

Once you have a compatible 2.5mm headset, locate the headset jack on the handset.

Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless

handset. The plug should fit securely. Do not force the connection.

NOTE:

Whenever a compatible headset is connected to

the cordless handset, the microphone on the

handset will be muted. This is done to limit the effect

of background noise.

Your phone is also equipped with a detachable belt

clip. Align the pins on the inside edge of the clip

with the notches on the sides of the handset. The

belt clip should snap securely into place. Do not

force the connection.

Table of Contents