Answering system settings
Number of rings
You can choose from two, three, four, five, six rings or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This enables
you to check for new messages and avoid paying unnecessary long distance
charges if you are calling from out of your local area.
Press MENU/
1.
or
2.
Press
/SELECT.
MENU
or
3.
Press
/SELECT.
MENU
or
4.
Press
/SELECT.
MENU
or
5.
Press
/SELECT to save.
press
MENU
Remote access code
A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code from
00 to 99.
Press MENU/
1.
or
2.
Press
/SELECT.
MENU
or
3.
Press
/SELECT.
MENU
or
4.
Press
/SELECT.
MENU
5.
Use the dialing keys (0-9) to enter a two-digit number, then
/SELECT to save.
press
MENU
when the handset is not in use.
SELECT
to highlight >Answering sys, then press
to highlight >Ans sys setup, then press
to highlight ># of rings, then press
to choose 6, 5, 4, 3, 2 or Toll saver, then
when the handset is not in use.
SELECT
to highlight >Answering sys, then press
to highlight >Ans sys setup, then press
to highlight >Remote code, then press
46
Call screening
Call screening
># of rings
># of rings
# Of RINGS
# Of RINGS
>3
>3
# of rings
# of rings
>Remote code
>Remote code
REMOTE CODE
REMOTE CODE
19
19