Find Handset; Call Waiting; Equalizer; Redial - VTech LS6425 User Manual

Telephone operation

Find handset

The find handset feature helps you find misplaced handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base. All
•
idle handsets ring, the handset screens display
** Paging **.
To end the paging tone:
• To end the paging tone, press
any dialing key (0-9, #,
/FIND HANDSET on the telephone base.
Press OFF/
•
the handset. Its screen shows Ringer muted and
• All registered handsets ring when being paged even if the ringer volume is set
to off.

Call waiting

If you subscribe to call waiting service from your telephone service provider, you
hear an alert tone when there is an incoming call while you are on another call.
/FLASH to put your current call on hold and take the new call.
• Press
• Press /FLASH at any time to switch back and forth between calls.

Equalizer

The equalizer feature on the handset enables you to change the
audio quality of the handset to best suit your hearing.
While on a call or intercom call, or listening to a message or
announcement, press
Treble 2, Bass or Natural (the default setting) for the handset.
The current setting is displayed on the handset briefly.

Redial

Each system handset stores the last 10 dialed numbers. Entries are shown in
reverse chronological order. When there are already 10 entries, the oldest entry
is deleted to make room for the new entry. When you access the redial list with
no records, the handset plays two beeps and shows Redial empty.
/
) on the handset or press
or MUTE/
CANCEL DELETE
EQ to select the equalizer setting Treble 1,
/SPEAKER,
,
FLASH
to temporarily turn off the paging tone on
21
.