Message Alert Tone; Message Recording Time - VTech LS6425 User Manual

Answering system settings

Message alert tone

The telephone base beeps every 10 seconds to alert you of new messages. The
tone stops when all new messages have been reviewed.
Press MENU/
1.
or
2. Press
/SELECT.
MENU
or
3. Press
/SELECT.
MENU
or
4. Press
/SELECT.
MENU
or
5. Press
/SELECT to save.
MENU
• The answering system must be turned on for the message alert tone to function.
• Press any key on the telephone base (except /FIND HANDSET) to temporarily
silence the message alert tone.

Message recording time

You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
Press MENU/
1.
or
2. Press
/SELECT.
MENU
or
3. Press
/SELECT.
MENU
or
4. Press
/SELECT.
MENU
or
5. Press
>1 minute, then press
when the handset is not in use.
SELECT
to highlight >Answering sys, then press
to highlight >Ans sys setup, then press
to highlight >Msg alert tone, then press
to choose >On or >Off, then press
when the handset is not in use.
SELECT
to highlight >Answering sys, then press
to highlight >Ans sys setup, then press
to highlight >Recording time, then press
to choose >3 minutes, >2 minutes, or
/SELECT to save.
MENU
47
Remote code Remote code
>Msg alert tone >Msg alert tone
MSG ALERT TONE MSG ALERT TONE
>On >On
Msg alert tone Msg alert tone
>Recording time >Recording time
RECORDING TIME RECORDING TIME
>3 minutes >3 minutes