Ptt To Multiple Handsets - VTech LS6425 User Manual

Multiple handset use

PTT to multiple handsets

When you have two to five registered handsets, PTT supports one-to-all calls
(one-to-four maximum). However, when you have six or more registered
handsets, PTT supports a maximum of one-to-three calls. The first four
registered handsets will be able to use this feature. Other handsets can only use
PTT for one-to-one calls.
1. To begin a PTT call to multiple handsets:
• Press and hold PUSH TO TALK when the handset is not in use.
If you have more than two handsets, press PUSH TO TALK when the
•
handset is not in use. Press
then press
Your handset displays Connecting to all handsets... for a few seconds. When
the connection is made, all handsets display Press and hold [PTT] to talk and
beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
2.
microphone is on. Speak towards the handset. Your voice is broadcast to all
destination handsets.
While you are speaking, your handset displays PTT To handset:
represents the destination handset).
Release PUSH TO TALK after speaking. Both handsets beep once again.
3.
After the handsets beep, you can press and hold PUSH TO TALK to speak
again or the destination handsets can respond (see Answer a PTT call on
page 30).
4. Press OFF/
CANCEL
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
After PUSH TO TALK is released, the PTT call session remains open for a short
time. If no one presses PUSH TO TALK within 10 seconds, the PTT call session
ends automatically.
/SELECT or PUSH TO TALK.
MENU
to end the PTT call
and #, or
or
The handset displays Push to talk Ended
.
29
to highlight >All handsets
X (X