Pushing The Refrigeration Appliance Into The Building-In Niche - Miele F 2671 Vi Operating And Installation Instructions

Pushing the refrigeration appliance
into the building-in niche
Push the refrigeration appliance into
the niche, taking care not to damage
the electrical and mains water con-
nections.
If you are installing several refrigera-
tion appliances side by side, now se-
cure the appliances to one another
(see the installation instructions for the
side-by-side installation kit).
 To ensure that the refrigeration appli-
ance can then be aligned correctly,
the plinth ventilation grille must be re-
moved from the appliance plinth:
 Carefully guide a flat-head screw-
driver through the plinth ventilation
grille  on both sides and use it to
push the internal plastic latches out-
wards to release the plinth ventilation
grille.
 Place the plinth ventilation grille to
one side.
 Affix edge protection  to the adja-
cent furniture fronts.
 Insert the plug connector at the back
of the refrigeration appliance (see "In-
stallation – Electrical connection").
 Insert the plug  into the socket.
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.

Risk of damage due to electrical
overload.
If the refrigeration appliance is elec-
trically overloaded, this can cause a
short circuit and thus damage your
refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cable to prevent
it becoming caught: tie a piece of string
to the middle of the cable and as the re-
frigeration appliance is being pushed
into the niche, pull the cable forward
underneath the appliance.
Installation
33