Pushing The Appliance Into The Niche - Miele F 2671 Vi Operating And Installation Instructions

Installation

Pushing the appliance into the niche

Push the appliance into the niche,
taking care not to damage the
electrical and mains water
connections.
If you are installing several
refrigeration appliances side by side,
secure the appliances to one another
now (see the instructions of the side-
by-side installation kit).
 To ensure that the refrigeration
appliance can then be aligned
correctly, the plinth must be removed
from the appliance base:
 Carefully guide a flat-head
screwdriver through the grate in the
plinth  on both sides and use it to
push the internal plastic latches
outwards to release the plinth panel.
 Place the plinth to one side.
32
 Affix an edge protection  to the
adjacent furniture fronts.
 Insert the plug connector at the back
of the appliance (see "Installation -
Electrical connection").
 Insert the plug  into the electrical
socket.
The wall socket should be close to
the appliance and easily accessible.

Risk of damage due to electrical
overload.
If the refrigeration appliance is
electrically overloaded, this can
cause a short circuit and thus
damage your appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Useful tip: Secure the power cord to
prevent it becoming caught: Tie a piece
of string to the middle of the cable and
as the appliance is being pushed into
the niche, pull the cable forward
underneath the appliance.
 Carefully push the appliance into the
niche.