Performing A Self Test - Miele F 2671 Vi Operating And Installation Instructions

Performing a Self test 
Perform a Self test
that your refrigeration appliance is not
working properly and want to check if it
is suffering from any problems.
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm your se-
test
lection.
 Touch the  sensor control if you
wish to terminate the process.
The starts and the refrigeration
Self test
appliance is checked for any faults or
malfunctions.
- The message System restart
pear on the display if the self test
does not discover any faults or mal-
functions.
- If the self test does discover any
faults or malfunctions, they are indic-
ated as error messages on the dis-
play.
An alarm will also sound.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the  sensor control.
 Make a note of the error message(s)
displayed.
 Contact the Miele Customer Service
Department and inform them of the
error message(s) on the display.
 Confirm the message with OK.
System restart will appear on the display.
The refrigeration appliance briefly
switches off and then back on automat-
ically.
if you are concerned
Self
will ap-
Selecting additional settings
Self test completed
play.
 Confirm the message with OK.
The main screen will appear on the dis-
play again.
will appear on the dis-
73