Building The Appliance Into A Kitchen Run - Miele KFN 29683 D obsw Operating And Installation Instruction

Building the appliance into a
kitchen run

If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the
ventilation gaps given.
a Top box
b Appliance
c Housing unit
d Wall
* The appliance depth is increased by
approx. 15 mm for appliances with
wall spacers fitted.
The appliance can be built into a
kitchen run (max. depth 580 mm) and
installed directly next to a kitchen
furniture housing unit. The appliance
door will protrude in front of furniture
fronts by 102 mm (approx. 117 mm with
wall spacers fitted). This enables the
doors to be opened and shut without
being obstructed. To match the height
of the rest of the kitchen, the appliance
can be fitted with a suitable top box .
When installed next to a wall  a
distance of approx. 40 mm must be
maintained on the hinge side between
the wall  and the appliance , so that
the doors and the handles have
sufficient space for opening.
The larger the ventilation gap, the
more economically the compressor
will work.
– A ventilation gap of at least 50 mm
depth must be allowed for behind the
whole width of the top box for air to
circulate.
– The cross-section of the air inlet and
outlet under the ceiling must be at
2
least 300 cm
circulate without obstruction.
Installation
to ensure that air can
93