Building The Appliance Into A Kitchen Run - Miele FN 22062 ws Operating And Installation Instructions

Building the appliance into a
kitchen run

If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the ventila-
tion gaps given.
 Top box
 Refrigeration appliance
 Housing unit
 Wall
* The appliance depth is increased by
approx. 35 mm for appliances with
wall spacers fitted.
The appliance can be built into a kit-
chen run and installed directly next to a
kitchen furniture housing unit. The ap-
pliance front must protrude in front of
furniture fronts by at least 34 mm at the
sides and by at least 55 mm in the
middle. This enables the doors to be
opened and shut without being ob-
structed. To match the height of the rest
of the kitchen, the appliance can be fit-
ted with a suitable top box .
When installed next to a wall  a dis-
tance of at least 55 mm must be main-
tained on the hinge side between the
wall  and the appliance . This
equates to the distance that the handle
protrudes by when the door is open.
The larger the ventilation gap, the
more economically the compressor
will work.
– A ventilation gap of at least 50 mm
depth must be provided at the back
of the appliance behind the whole
width of the top box for air to circu-
late.
– The cross-section of the ventilation
gap under the ceiling must be at least
2
300 cm to ensure that air can circu-
late without obstruction.
Installation
49