Miele F 2671 Vi Operating And Installation Instructions page 75

– Adjusting the duration of the Auto-
Close function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm your
Close
selection.
 Use the  and  sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your selec-
tion.
To protect against inadvertent open-
ing: if you do not pull the appliance
open, it will close again by itself after a
duration defined by you.
Switching on Pull2open
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm
assistant
your selection.
 Use the  and  sensor controls to
select Mode and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Pull2open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
Door
Auto-
Door
and select OK to
Selecting additional settings
– Adjusting the intensity
You can also adjust the intensity of the
function. The lower the set in-
Pull2open
tensity, the less force required when
you pull the appliance door.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to select
tensity and select OK to confirm your
selection.
 Use the  and  sensor controls to
select the right intensity (
) and select OK to confirm your
High
selection.
Door
In-
Low , Medium ,
75