Table of Contents
Advertisement
Pushing the refrigeration appliance
into the building-in niche
Push the refrigeration appliance into
the niche, taking care not to damage
the electrical and mains water
connections.
If you are installing several
refrigeration appliances side by side,
now secure the appliances to one
another (see the installation
instructions for the side-by-side
installation kit).
To ensure that the refrigeration
appliance can then be aligned
correctly, the plinth ventilation grille
must be removed from the appliance
plinth:
Carefully guide a flat-head
screwdriver through the plinth
ventilation grille on both sides and
use it to push the internal plastic
latches outwards to release the plinth
ventilation grille.
Place the plinth ventilation grille to
one side.
Affix edge protection to the
adjacent furniture fronts.
Insert the plug connector at the back
of the refrigeration appliance (see
"Installation – Electrical connection").
Insert the plug into the socket.
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.
Risk of damage due to electrical
overload.
If the refrigeration appliance is
electrically overloaded, this can
cause a short circuit and thus
damage your refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cable to prevent
it becoming caught: tie a piece of string
to the middle of the cable and as the
refrigeration appliance is being pushed
into the niche, pull the cable forward
underneath the appliance.
Installation
33
Hide quick links:
Advertisement
Table of Contents
