Mains Water Connection; Information About The Mains Water Connection - Miele F 2671 Vi Operating And Installation Instructions

Installation

Mains water connection

Information about the mains water
connection

Risk of injury and appliance
damage if appliance is not connec-
ted properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be connec-
ted to the mains water supply by
suitably qualified persons.

Disconnect the refrigeration ap-
pliance from the power supply before
connecting it to the water supply.
Close the stopcock before connect-
ing the refrigeration appliance to the
water supply.

Risk to health and risk of dam-
age due to contaminated water.
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.
This refrigeration appliance meets the
requirements of IEC 61770 and
EN 61770.
54
Connection to the water supply must
comply with the applicable regula-
tions in the country where the appli-
ance is being installed. All appliances
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable regula-
tions in the respective country.
The water connection pressure needs
to be between 200 kPa and 800 kPa
(2 bar and 8 bar).

Risk of damage due to excessive
water pressure.
Excessive water pressure in the pipe
can cause damage to the refrigera-
tion appliance.
Install a pressure reducing valve if
the water pressure in the system ex-
ceeds 800 kPa (8 bar).
Do not install the system if the water
pressure exceeds 830 kPa (8.3 bar).
Contact a plumbing specialist if you
are unsure of your water pressure.
Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the stainless steel hose to
the fresh water supply and avoid
connection to a water supply in
which the water might stagnate.
Only use the stainless steel hose
supplied. The stainless steel hose
must not be shortened, extended or
replaced by a different hose.