Answering System Setup; Set Number Of Rings - VTech DS6121 User Manual

Answering system
5. Press /SKIP or /REPEAT until the system announces the correct minute,
then press CLOCK. The system announces the current day.
6. Press /SKIP or /REPEAT until the system announces the correct day, then
press CLOCK. After a confirmation tone, the system announces the new clock
setting and exits programming mode.

Answering system setup

The answering system uses voice prompts to guide you through feature setup.
/PLAY/STOP anytime to save and exit the SETUP menu.
Press

Set number of rings

This feature allows you to select the number of rings before the answering system
answers. You can choose from two, four or six rings or toll saver. With toll saver
selected, the answering system answers after two rings if you have new messages,
and after four rings if there are no new messages.
To set the number of rings:
1. Press SETUP when the telephone is not in use. The system announces the
current number of rings setting.
2. Press /SKIP or /REPEAT until the system announces the desired setting,
then press SETUP to save the setting and go to the next setting, or press
/PLAY/STOP to save and exit setup mode.
www.vtechphones.com 31