Telephone Base Installation - VTech DS6121 User Manual

• Use only the
power adapter
supplied with this
product. To order
a replacement,
visit our website at
www.vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
www.vtechcanada.
com or call 1 (800)
267-7377.
• The power unit
is intended to be
correctly oriented
in a vertical
or floor mount
position. The
prongs are not
designed to hold
the plug in place
if it is plugged into
a ceiling or an
under-the-table/
cabinet outlet.
2
Getting started

Telephone base installation

Install the telephone base as shown below. Make sure that the electrical outlet is
not controlled by a wall switch. If you subscribe to Digital Subscriber Line (DSL)
high-speed Internet service through your telephone line, you must have a DSL
filter between the telephone base and the telephone wall jack. The filter prevents
noise and caller ID problems caused by DSL interference. Please contact your
DSL service provider for more information about DSL filters.
Telephone
wall jack
DSL filter (not included)
required if you have DSL
high-speed Internet service
www.vtechphones.com
Telephone line cord
Telephone base
Telephone base
power adapter
Electrical outlet
not controlled by
a wall switch