Remote Access - VTech DS6121 User Manual

• If no key is pressed
after entering
remote access, new
messages will be
played automatically.
If there are no new
messages, all old
messages will be
played automatically.
• Once the new
messages have
been played,
the system will
announce the help
menu options. If
no key is pressed
within 20 seconds,
the remote access
call is automatically
disconnected.
• When the answering
system is turned
off, the telephone
will answer after 10
rings, and announce
"Please enter your

remote access

code."
40
Answering system
Remote access
A two-digit security code is required to access the system remotely from any
touch tone telephone. The preset code is 19; see page 33 to change it.
1. Dial your telephone number from any touch tone telephone.
2. When the system answers and plays your announcement, enter the two-digit
security code. If you have messages, the system will play them automatically.
3. You may also enter one of the following remote commands.
Command
1
2
3
33
4
5
*5
6
*7
8
0
4. Hang up or press 8 to end the call.
www.vtechphones.com
Function
Play all messages.
Play only new messages.
Delete the current message (during playback).
Delete all messages.
Repeat the current message (during playback).
Stop.
Hear a list of remote commands.
Skip to the next message (during playback).
Record a new announcement.
End the call.
Turn the answering system on or off.