New Message Indication; Message Playback; Options During Playback - VTech DS6121 User Manual

• If the memory is
full, the system will
answer after 10
rings and announce,
"Memory is full.
Enter the remote
access code."
• If the answering
system is off, the
system will answer
after 10 rings and
announce, "Please
enter your remote
access code."
• If the system has
less than five
minutes of recording
time left, the
remaining time will
be announced.
• If F is flashing in the
message window,
the memory is
full. You will have
to delete some
messages before
new ones can be
recorded.
36
Answering system

New message indication

The message display counter will flash when there are new answering system
messages.
If the new message alert tone is turned on, the telephone base will beep every
ten seconds when there are unreviewed messages.

Message playback

1. Press /PLAY/STOP to listen to messages.
2. Press /PLAY/STOP again to stop playback.
If you have new messages, you will hear only the new messages (oldest first). If
there are no new messages, the system will play back all messages (oldest first).
When playback begins, the total number of messages is announced, followed by
the day and time of the first message to be played.

Options during playback

Press VOL+/ VOL- to adjust the speaker volume.
•
• Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing. Press /REPEAT
•
twice to listen to the previous message.
Press X/DELETE to delete the current message. The system will advance to
•
the next message.
www.vtechphones.com