FUTABA FASSTest-2.4GHz T18SZ Series Instruction Manual page 20

Digital Trims T1-T6
T6
T4
T2
Digital trim operational example
◆When an airplane nose up though an
elevator stick is neutral.
Elevator neutral
Down
20 <Before Use>
T5
T3
T1
◆Elevator trim to down
This transmitter is equipped with 6 digital trims.
Each time you press a trim button, the trim position
moves one step. If you continue pressing it, the trim
position starts to move faster. In addition, when
the trim position returns to the center, the tone will
change. You can always monitor trim positions by
referencing the LCD screen.
*You can select the trim step amount and the display unit
on the home screen on the T1-T6 setting screen within the
linkage menu.
Note: The trim positions you have set will be stored in the
non-volatile memory and will remain there.
The upper digital trimmers T5 and T6 offer
analog input.
*You can select a slide lever and set the movement direction
on the setting screen of mixing functions.
◆When an airplane nose down though
an elevator stick is neutral.
Elevator neutral
Up
◆It's adjusted so that it may fly levelly.
◆Elevator trim to up