FUTABA FASSTest-2.4GHz T18SZ Series Instruction Manual page 22

Touch Panel
Touch the panel with your finger or the attached
stylus pen, which is also used as a toolbox, to enter
data.
*Plastic film is attached to the touch panel. Please be careful so
that you don't scratch the touch panel with anything hard such
as a metal object. Don't push the touch panel with excessive
force or drop anything on the panel.
*Although you may find some air bubbles under the plastic
panel due to environmental changes such as temperature, it is
not a defect and will cause no problems.
* Color LED is made from many pixels. Some pixels hold
lighting. Moreover, some pixels go out. And a screen may
flicker. Such condition is the characteristics of color LED. It
is not failure.
Home/Exit and U.menu/Mon.
Home/Exit
Button
<Before Use>
22
U.menu/Mon
Button
Stylus pen
●You may use this tool
as a stylus pen.
A rubber cap is attached to the stylus pen/
toolbox. You may use this stylus with rubber
cap when operating the touch panel. The
stylus allows more precise operation than
fingers without fear of damaging the panels
surface.
Home/Exit:
Press
Press and hold
It pushes from
HOME screen.
U.menu/Mon:
Press
Press and hold
*There is no function of U.menu (user menu).
It is due to add by update.
Return to the previous
screen
Return to the Home screen
To TELEMETRY display
To Servo Monitor display
To Model Select display