Setting The Time / Date Manually - Auriol Z29962A Operation And Safety Notes

tinues, you can also set the time and date manually
(see "Setting the time / date manually").
Operation
Q 
Reception of the DCF radio signal may be disrupted
or interrupted at the location of the weather station.
In this case you are able to set the instrument
manually.

Setting the time / date manually

Q 
1. Press and hold the CLOCK button
3 seconds. The hours on the time display
begin to flash.
2. Press the ADJUST button
number.
tip: keep the ADJUST button
faster time setting. You can also use this option
for the subsequent settings.
If no button is pressed in the space of approx.
1 minute, the LCD automatically returns to the
standard display.
3. Press the CLOCK button
entry. The minutes on the time display
to flash.
4. Repeat steps 2 and 3 to set the minutes, seconds,
year
17
note: the seconds display can only be reset
to 00.
5. The LCD returns to the standard display after
you have made the settings.
and date
8
14
to set the required
12
pressed for
12
to confirm your
14
(month and day).
for approx.
9
start
9
GB/MT 79