Lubrication; Greasing The Machine - Toro STX-38 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Before each use or daily (grease it
immediately after every washing.)
Grease Type: General-purpose grease
1. Lower the grinder, stop the engine, and remove the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting
Figure 28).
4. Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5. Wipe up any excess grease.
Figure 26
Figure 27
(Figure 26 through
22
Figure 28