Specifications; Attachments/Accessories - Toro STX-38 Operator's Manual

Figure 16
Lift/Lower Speed Control
You can change how quickly the grinder head raises and
lowers using the lift/lower speed control, located under
the right side of the control panel
dial counter clockwise to increase the speed or clockwise to
reduce the speed.
If you ever need to stop the machine with the grinder head
raised, turn the control dial all the way clockwise to lock the
grinder head before leaving the machine or performing any
maintenance
CAUTION
If you leave the grinder head in the Up position
without turning the lift/lower speed control dial all
the way clockwise, the grinder could lower crushing
you or bystanders.
Whenever possible, lower the grinder to the ground
before stopping the engine. If you must keep
the grinder head raised, turn the lift/lower speed
control dial all the way clockwise to lock the grinder.
(Figure 17). Rotate the

Specifications

Note: Specifications and design are subject to change
without notice.
Width
Length
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
14
Figure 17
86 cm (34 inches)
241 cm (95 inches)
130 cm (51 inches)
794 kg (1750 lb)