Toro STX-38 Operator's Manual page 24

Efi stump grinder with intelli-sweep
Hide thumbs Also See for STX-38:
Table of Contents

Advertisement

Checking the Engine-oil Level
Service Interval: Before each use or daily
Note: Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing, and other body
parts away from the muffler and other hot surfaces.
Important: Do not overfill the crankcase with oil
because damage to the engine may result. Do not run
engine with oil below the low mark because the engine
may be damaged.
1. Lower the grinder and stop the engine. Remove the key.
2. Check the oil as shown in
1
3
6
8
Figure 31
Figure
31.
2
5
4
7
10
9
G008792
Changing the Engine Oil
Service Interval: Every 100 hours/Yearly (whichever comes
first) (more often in dirty or dusty
conditions).
Note: Dispose of the used oil at a recycling center.
1. Start the engine and let it run five minutes. This warms
the oil so it drains better.
2. Park the machine so that the rear is slightly lower than
the front to ensure the oil drains completely.
3. Lower the grinder and stop the engine. Remove the key.
4. Place a pan below the drain hose. Rotate the oil drain
valve to allow oil to drain
1
1. Oil-drain valve
1
1. Oil-drain hose
5. When oil has drained completely, close the drain valve.
6. Dispose of the used oil at a recycling center
24
(Figure 32
and
Figure
Figure 32
Figure 33
33).
G02491
1
G024912

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

23214

Table of Contents