Toro STX-38 Operator's Manual page 13

Grinder Control Lever
Operate the grinder using the grinder control lever as follows:
•
To start the grinder (Figure
the top of the lever, then squeeze the trigger. Once the
grinder has started, you can release the red button.
•
To stop the grinder (Figure
more than a half second.
Note: If you are operating the grinder and momentarily
release the trigger (for less than a half second) the grinder
will continue operation.
Figure 13
1. Neutral
2. Start the grinder
•
To raise the grinder, pull the lever rearward
13), press the red button on
13), release the trigger for
3. Run the grinder
4. Stop the grinder
(Figure 14).
•
To lower the grinder, push the lever forward
•
To rotate the grinder to the right or left, move the lever in
the desired direction.
13
Figure 14
(Figure
Figure 15
15).