Lubrication; Greasing The Machine - Toro STX-26 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease
1. Park the machine on a level surface and lower
the hydraulic lift.
2. Shut off the engine and remove the key.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting
and Figure 25).
5. Pump grease into the fittings until grease begins
to ooze out of the bearings (approximately 3
pumps).
6. Wipe up any excess grease.
Figure 24
(Figure 24
g013183
22
Figure 25
g013184