Specifications; Attachments/Accessories; Operation; Adding Fuel - Toro STX-38 Operator's Manual

Efi stump grinder with intelli-sweep
Hide thumbs Also See for STX-38:
Table of Contents

Advertisement

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Figure 16
86 cm (34 inches)
241 cm (95 inches)
130 cm (51 inches)
794 kg (1,750 lb)

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
Important:
Before operating the machine, check
the fluid levels, and remove debris from the
machine. Ensure that the area is clear of people
and debris. You should also know and have
marked the locations of all utility lines.

Adding Fuel

DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
g019867
• Fill the fuel tanks outdoors, in an open
area, when the engine is cold. Wipe up any
fuel that spills.
• Never fill the fuel tanks inside an enclosed
trailer.
• Never smoke when handling fuel and stay
away from an open flame or where fuel
fumes may be ignited by a spark.
• Store fuel in an approved container and
keep it out of the reach of children. Never
buy more than a 30-day supply of fuel.
• Do not operate without entire exhaust
system in place and in proper working
condition.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

23214

Table of Contents