H3C WA Series Fundamentals Configuration Manual page 83

To do...
Display hotkeys
By default, the Ctrl+G, Ctrl+L and Ctrl+O hotkeys are configured with command line and the Ctrl+T
and Ctrl+U commands are NULL.
Ctrl+G corresponds to the display current-configuration command.
Ctrl+L corresponds to the display ip routing-table command.
Ctrl+O corresponds to the undo debugging all command.
Table 11-2 Hotkeys reserved by the system
Hotkey
Ctrl+A
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+H
Ctrl+K
Ctrl+N
Ctrl+P
Ctrl+R
Ctrl+V
Ctrl+W
Ctrl+X
Ctrl+Y
Ctrl+Z
Ctrl+]
Esc+B
Esc+D
Esc+F
Esc+N
Esc+P
Esc+<
Use the command...
display hotkey
Moves the cursor to the beginning of the current line.
Moves the cursor one character to the left.
Stops performing a command.
Deletes the character at the current cursor position.
Moves the cursor to the end of the current line.
Moves the cursor one character to the right.
Deletes the character to the left of the cursor.
Terminates an outgoing connection.
Displays the next command in the history command buffer.
Displays the previous command in the history command buffer.
Redisplays the current line information.
Pastes the content in the clipboard.
Deletes all the characters in a continuous string to the left of the cursor.
Deletes all the characters to the left of the cursor.
Deletes all the characters to the right of the cursor.
Exits to user view.
Terminates an incoming connection or a redirect connection.
Moves the cursor to the leading character of the continuous string to the left.
Deletes all the characters of the continuous string at the current cursor position and
to the right of the cursor.
Moves the cursor to the front of the next continuous string to the right.
Moves the cursor down by one line (available before you press Enter)
Moves the cursor up by one line (available before you press Enter)
Specifies the cursor as the beginning of the clipboard.
11-8
Remarks
Available in any view. See
hotkeys reserved by the system.
Function
Table 11-2 for