Configuring Common Settings For Console Login - H3C WA Series Fundamentals Configuration Manual

Figure 14-5 Configuration page
Step4 You can then configure the AP or check the information about the AP by executing commands. You
can also get help by typing ?. For information about the commands, see the following sections.

Configuring Common Settings for Console Login

Table 14-3 lists the common settings for console port login.
Table 14-3 Common settings for console port login
To do...
Enter system view
Enter console user interface view
Console port
configuration
Use the command...
system-view
user-interface console 0
Baud rate speed speed-value
parity { even | mark |
Check mode
none | odd | space }
Stop bits stopbits { 1 | 1.5 | 2 }
Data bits databits { 5 | 6 | 7 | 8 }
Define a shortcut
escape-key { default |
key for terminating
character }
tasks.
—
—
Optional
The default baud rate is 9,600 bps.
Optional
By default, the check mode of the console
port is set to none, which means no check
bit.
Optional
The default stop bits of a console port is 1.
Optional
The default data bits of a console port is 8.
Optional
By default, you can use Ctrl+C to terminate
a task.
14-6
Description