H3C WA Series Fundamentals Configuration Manual page 116

To do...
Configure the type
of terminal display
under the current
user interface.
Configure the
command level
available to the
users logging in to
the console user
interface
Set the maximum
number of lines on
the next screen
Set history
command buffer
size
Set the timeout
timer
Common console login configuration takes effect immediately. The connection may be interrupted
when you perform such configuration after logging in through the console port. Therefore, use another
login method to configure the console port settings. To log in to your AP again through the console port,
modify the settings of the terminal program running on your PC to make them consistent with the
console port settings on your AP shown in
Console port login configurations for different authentication modes
Table 14-4 lists console port login configurations for different authentication modes.
Table 14-4 Console port login configurations for different authentication modes
Authentication
mode
None
Password
Use the command...
terminal type { ansi |
vt100 }
user privilege level level
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Figure
Configuration
Configure not to authenticate users
Configure to authenticate users using the
local password
Set the local password
Optional
By default, the terminal display type is
ANSI.
Optional
By default, commands of level 3 are
available to the users logging in to the
console user interface.
Optional
By default, the next screen displays 24
lines.
A value of 0 disables the function.
Optional
By default, the history command buffer can
contain up to 10 commands.
Optional
The default timeout time is 10 minutes.
The system automatically terminates the
user's connection if there is no information
interaction between the device and the
user in timeout time.
Setting idle-timeout to 0 disables the timer.
14-4.
For more information, see
None Authentication for Console Port
Login.
For more information, see
Password Authentication for Console
Port
14-7
Description
Description
Configuring
Configuring
Login.