H3C WA Series Fundamentals Configuration Manual page 125

Table 14-6 Common Telnet settings
To do...
Enter system view
Enable the Telnet Server
Enter one or more VTY user interface
views
Enable terminal
services
Set the command that is
automatically executed
when a user logs into
the user interface
Configure the protocols
the VTY user interface
supports
Define a shortcut key
for terminating tasks.
Configure the type of
terminal display under
the current user
interface.
VTY user
Configure the command
interface
level for users logging in
configuration
to the VTY user
interface
Set the maximum
number of lines on the
next screen
Set history command
buffer size
Set the timeout time of a
VTY user interface
Use the command...
system-view
telnet server enable
user-interface vty
first-number
[ last-number ]
shell
auto-execute
command text
protocol inbound { all |
ssh | telnet }
escape-key { default |
character }
terminal type { ansi |
vt100 }
user privilege level
level
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
14-16
Remarks
—
Optional
By default, telnet server is enabled.
—
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, no command is
automatically executed when a user
logs into a VTY user interface.
Optional
By default, APs support telnet, and
only APs that support 802.11n
support SSH.
Optional
By default, you can use Ctrl+C to
terminate a task.
Optional
By default, the terminal display type is
ANSI.
Optional
By default, commands of level 0 are
available to users logging in to the
VTY user interface.
Optional
By default, the next screen displays
24 lines.
A value of 0 disables the function.
Optional
By default, the history command
buffer can contain up to 10
commands.
Optional
The default timeout time is 10
minutes.
The system automatically terminates
the user's connection if there is no
information interaction between the
device and the user in timeout time.
Setting idle-timeout to 0 disables the
timer.