H3C WA Series Fundamentals Configuration Manual page 102
Wlan access points
Hide thumbs
Also See for WA Series:
- Layer 2 command reference (133 pages) ,
- Command reference manual (105 pages) ,
- Configuration manual (84 pages)
Table of Contents
Advertisement
Configuration procedure
1)
Configure the HTTP server Device.
# Create basic ACL 2000, allowing packets with the source IP address in 10.1.1.0/24.
<Device> system-view
[Device] acl number 2000
[Device-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Device-acl-basic-2000] quit
# Associate the HTTP service to ACL 2000.
[Device] ip http acl 2000
# Enable the HTTP service.
[Device] ip http enable
2)
Verify the configuration.
If you open the IE on Host A, and type http://10.1.1.1, you can open the Web login page of Device.
If you open the IE on Host B, and type http://10.2.1.1, you cannot open the Web login page of
Device.
12-4
Hide quick links:
Advertisement
Table of Contents
