H3C WA Series Fundamentals Configuration Manual page 61

Configuration procedure
If the available memory space of the master and slave is insufficient, use the fixdisk command to clear
the memory or use the delete /unreserved file-url command to delete the files not in use and then
perform the following operations.
# Log in to the server through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1
Connected to 10.1.1.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the transmission mode to binary.
[ftp] binary
200 Type set to I.
# Download boot file newest.app from PC to the device.
[ftp] get test.bin
227 Entering Passive Mode (10,1,1,1,4,1).
125 BINARY mode data connection already open, transfer starting for / test.bin.
.....226 Transfer complete.
FTP: 5805100 byte(s) received in 19.898 second(s) 291.74K byte(s)/sec.
# Upload configuration file config.cfg of the AP to the server for backup.
[ftp] ascii
[ftp] put config.cfg back-config.cfg
227 Entering Passive Mode (10,1,1,1,4,2).
125 ASCII mode data connection already open, transfer starting for /config.cfg.
226 Transfer complete.
FTP: 3494 byte(s) sent in 5.646 second(s), 618.00 byte(s)/sec.
[ftp] bye
# Specify test.bin as the main boot file to be used at the next startup.
<Sysname> boot-loader file test.bin main
# Reboot the AP.
<Sysname> reboot
8-6