Page 1
π H-86, H-87, H-89 1-800-295-5510 uline.com FOOT-OPERATED IMPULSE SEALERS PARTS Fuse Power Sealing Holder Switch Light Transformer Pressing Timer Setting Knob Sealer Pressing Plate For Body Refractory Cloth Working Plate Sealing Press Fixed Bracket Plate Operating Board Power Supply Cord...
Page 2
ASSembly InSTRucTIonS Insert Standing Tube into Pedal Base and connect with short screw. Figure 1 (See Figure 1) 2. With four long screws, connect Body to Standing Tube. (See Figure 2) Figure 2 3. Attach Tension Rod to Puller located under Base. Attach to Foot Figure 3 Pedal.
Page 3
The sealing time is automatically controlled by the timer. you can leave the unit plugged in and turned on between seals. Power is only used during sealing. SPecIFIcATIonS model H-86 H-87 H-89 Impulse Power 520 W 380 W...
Page 4
AddITIonAl InFoRmATIon • Always keep the sealing platform clean. Remove • Information regarding potential risks of fire, electric any residue (typically overheated plastic) from the shock, or injury to persons that are capable of teflon barrier tape. occurring due to use of the product. The instructions shall caution the user to place the product and • Clean the sealing platform with a dry cloth.