Toro Multi Pro 1750 Installation Instructions Manual page 8

Figure 7
1. Master spray valve
2. Rate valve
3. Agitation valve
5. Remove the 3-contact connector of the wire harness
from the valve (Figure
6. Repeat steps 4 and 5
the wire harness labeled
.
VALVE
7. Remove the 5 push-in fasteners of the wire
harness from the section-valve bracket and the
agitation/rate/master-spray bracket.
4. Valve electrical connector
(agitation valve)
5. 3-contact connector
(wire harness—
AGITATION
)
VALVE
6. Valve electrical connector
(master spray valve)
7).
for the 3-contact connectors of
and
RATE VALVE AGITATION
1. Bracket (throttle valve)
2. Push-in fastener
8
Figure 8
3. Bracket
(agitation/rate/master-spray
valve)